HOW TO USE:
For interior cabin plastics:
External plastics bleached and worn by time:
Before treating external and internal plastic and rubber parts, wash the surface with APC and dry with a clean microfiber cloth
All Round Plastic Protectant is available in 500ml format
All Around Plastic Protectant is very versatile, and lends itself to different types of use for both internal and external plastics.
Before using it, get the following material:
To dispense the solution in the desired dilution
Quality, dry and clean
Follow the following dilutions depending on the operation you need to perform.
Fill the graduated bottle with plain water up to the mark indicating the desired dilution, and then simply add the product up to the fill mark.
For internal plastics we recommend a 1: 1 dilution (one part of product and 1 part of water)
with our graduated bottles the operation is very simple:
The door plastics are among the most “stressed” because it is a surface that often comes into contact with the outside. Furthermore, by allowing us access to the vehicle, it is among the parts that we touch most. Like the dashboard, they suffer the aggression of the sun, which fades them with ultraviolet rays, but also mineral residues caused by raindrops that dry on the surface.
Proceed by dispensing the product on a microfiber applicator pad: you will have better control of the spreading, and you will be able to distribute the product more evenly.
I advise you to work small areas at a time, for better control of the spreading of the product over the entire treated surface.
The result will be a full color, which is not polished but saturated. That is, it appears deeper and revitalized, with an always natural look, like new, regardless of the color.
A real dressing that not only drastically improves the appearance of the plastics but protects them for a long time by sealing the micro-pores of the plastics, preserving their original color and protecting it from contamination to which they are subjected in daily use.
On surfaces subject to high stress, such as for example the door sills or the engine fairings and the shoulder of the tires, use the PURE product: it is also perfect for rubber parts.
We often forget, but it is also important to protect the seals to keep them soft and elastic: they will look like new and remain soft for a long time, also avoiding annoying creaks.
It is essential to protect the shoulder of tires that are heavily stressed and exposed to road dirt and all kinds of contamination, from iron oxide to salts, such as salt or road salts, in winter.
In fact, the tires are the car’s only contact point on the ground, and their shoulder undergoes a lot of stresses in motion. It is therefore important to ensure that it always remains elastic to avoid cracking and premature aging
The use of All Round Plastic Protectant is recommended above all in the change of season, when storing tires: we will preserve them by keeping them longer over time.
In fact, tires age and deteriorate even when they remain stationary: proper storage will preserve them and keep them longer over time.
Before its application, it is important to carefully remove the previous polish (if present) with Wheel & Tire Cleaner to thoroughly purify the surface and facilitate the adhesion of the new protective which will last even longer.
With All Round Plastic Protectant, you can get a perfect result and at the same time the finish you want: in just one step the tire will be protected and will look like new.
With a second pass, the color will be more saturated and intense.
For engine compartment plastics that are subject to high thermal stress, using All Around Plastic Protectant will allow you to protect them and prevent them from cracking and whitening.
Also in this case, before its drafting, proceed to a thorough cleaning with APC,
by removing all the dirt, we will free the micro-pores of the material and allow the protective one to adhere better, without damaging safety labels and color markers.
We summarize the recommended dilutions specifying that in all dilutions the UV protection remains unchanged:
To revive the coloring of bleached and worn plastics
(1 part of product and 1 part of water)
To restore the original color of faded and opaque internal plastics
(one part of product and 2 of water)
Empty all items and personal belongings from inside the car and put them aside in a bag.
Take the mats out of the car and vacuum and clean or wash them.
Thoroughly vacuum the seats and trunk, while paying attention to all the less accessible areas where dirt and dust deposit.
Clean the different materials with a specific cleaner and soft, clean microfibre cloths.
Always use a specific product and two microfibre cloths to clean the windows, one to clean the surface and remove dirt and the other to finish and prevent marks from forming.
When used undiluted on external plastic parts, it revives and saturates the colour, without creating shimmer or a glossy effect.
Diluted in a ratio of 1:1 (1 part product to 1 part water) on interior plastic parts, it creates a natural, even finish.
Yes, it does not contain silicones, but valuable polymers, which make the surface waterproof and protect it from UV rays.
All Round Plastic Protectant contains no silicones, it leaves no shiny finish, and it does not attract dust, and thus leaves a natural, even finish.
It makes the tyres look like new.
It depends. For weekly maintenance cleaning you can use it directly on plastic diluted to 1:1 (1 part product and 1 part water).
For extraordinary cleaning, you must first thoroughly clean the plastic parts with APC or Interior Cleaner Purifier, dry them with a microfibre cloth and then apply the All Round Plastic Protectant.