NEUTRAL FOAM WASH
Neutral Shampoo 2in1: by hand or foam gun
- 2 in 1 shampoo: hand wash with bucket and emollient pre-wash with foam gun
- Soft, compact and lubricated foam to avoid the formation of swirls and micro-scratches
Buy Now - Rs 1068
- Neutral shampoo ph7, ultra-concentrated with shining action
- Respects the protective agents applied previously, even the most delicate ones such as those with carnauba wax
- Creates a soft, compact and lubricated foaming film that makes it safe on any type of surface, allowing you to wash the car
- Without the risk of creating swirls or micro-scratches.
- Foaminess above the market average: its intense and homogeneous lubricating foam encapsulates dirt, facilitating removal during the subsequent rinsing phase without creating halos or streaks.
- Excellent economy thanks to high dilution ratios up to 1: 400 (1 part of product and 400 of water).
- Great emollient capacity: it is perfect if used with the foaming technique.
- Bubble Gum scent.
Hand wash with bucket:
- Dilute the product 1: 400 (3 caps of product in 10L of water)
- Apply the product starting from the top and always with a wet vehicle with a microfiber glove;
- Proceed to rinse the surface;
- Dry with the Super Dryer microfiber cloth ;
Pre-wash with Foam Gun:
- Dilute the product in Foam Gun in the proportion 1:10;
- Leave on for a period of time ranging from 3 to 5 minutes;
- Rinse at high pressure starting from the bottom
Neutral foam shampoo has an above average foaminess on the market: its foam generated with the foaming technique creates a compact film, which remains adhered to the surfaces. It has an intense and homogeneous lubricating action and encapsulates dirt, facilitating removal during the subsequent rinsing phase without creating halos or streaks.
The great emollient capacities detach all the dirt present, acting in a delicate way.
Its WAX SAFE technology makes it suitable for frequent use because it respects the underlying protection, freeing it from the surface dirt that decays its performance.
Used by hand with a bucket, Neutral Foam Shampoo boasts an excellent economy of use: it is in fact possible to dilute it up to 1: 400 (1 part of product and 400 of water) making it ideal for frequent washing or maintenance.
Make sure the vehicle surface is not hot and the car is in the shade avoiding direct sun.
The first phase is always that of the pre-wash.
In the presence of heavily anchored dirt, the advice is to carry out a pre-wash with our “Foam Gun Prewash” to remove the coarse dirt present on the surface to prevent the formation of scratches and facilitate the subsequent manual washing phase.
We suggest using the two-bucket washing method (one with the shampoo / water solution and the other with clean water only) in combination with a microfiber glove like our Double Face or a sponge / pad like our Microfiber Pad. To wash the rims and tires use an additional tool (sponge or glove)
Using the grate in the bucket helps remove dirt and impurities from the glove or sponge by making it settle to the bottom of the bucket.
It is recommended to wash the vehicle every one or two weeks
FIRST PHASE: PRE-WASH WITH FOAM GUN
- Dilute the product in Foam Gun in the proportion 1:10 (1 part of product and 10 of water)
- We deliver the solution obtained throughout the vehicle, always from the bottom up.
- Let the foam act for 3 to 5 minutes so that the product acts, taking care not to let it dry on the bodywork. Let's make sure we work in the shade and with cold bodywork.
- We can then proceed to rinse with high pressure starting from the top down. The easy rinsing of the product allows you to easily remove the foam, in a short time and without leaving residues.
- After the pre-wash, you can proceed with manual washing with a bucket with greater safety, having already removed 80% of the dirt and in particular all the coarse dirt, which risks causing the greatest damage if dragged on the bodywork with a sponge or washing glove.
SECOND PHASE: HAND WASH WITH BUCKET
- Dilute only three caps of the product in a bucket with 10L of water: Neutral Foam Shampoo has an ultra-concentrated formulation with a shiny action and a neutral pH.
- Use a second bucket with clean water for rinsing the glove. Work starting from the top and always with the vehicle wet with a soft sponge or microfiber glove.
- Proceed in small areas, using the least possible pressure with the glove / sponge: let the product do the cleaning and not the applied force. Frequently rinse the glove or sponge in the bucket of clean water before moving on to the next panel. This will remove the coarse dirt particles that remain trapped in the sponge itself and that could have an abrasive effect or worse create scratches on the paint, in the following steps.
Neutral Foam Shampoo creates a soft, compact and highly lubricated foaming film that makes it safe on any type of surface, allowing you to wash the car without the risk of creating swirls or micro-scratches
Proceed with washing the entire vehicle, avoiding letting the shampoo dry on the bodywork.
While washing its bubble gun fragrance will leave you pleasantly surprised.
Once you have finished washing with a glove or sponge, you can proceed with thorough rinsing and subsequent drying with our ultra-absorbent Super Dryer cloth.
Our advice is to use two Super Dryer drying cloths: one dedicated to the bodywork, another dedicated to glass, in order to leave the latter as dry as possible. You can also use Super Dryer to finish profiles or delicate details. In addition, when you dry the side of the car or the lower parts, fold the drying cloth to prevent it from touching the ground, collecting dirt that could create scratches.
To learn more about the drying technique with Super Dryer, I invite you to watch the video dedicated to washing accessories.
HELPFUL TIPS TO WASH THE EXTERIOR
-
Wash the car in a shaded area and never in direct sunlight, to prevent the shampoo from drying out, which will stain.
-
If the car has been exposed to the sun or the bonnet is very hot, cool the surface with a jet of cold water.
-
It is the least dirty part and you will avoid dirtying the glove: washing will be faster.
-
In the first you will put the solution of water and shampoo, in the second only water to rinse frequently the sponge or glove: you will avoid scratching the bodywork.
-
You will not forget any part, the product will be very effective and will not dry: you will prevent stains and marks.
-
Clean the rims with a brush that can reach the most hidden points.
When can I use Neutral Foam Shampoo?
Neutral Foam Shampoo is the perfect product for frequent or maintenance washes.
What does maintenance wash mean?
Maintenance washes are carried out once a week or once every two weeks after certain mileage. This wash aims to keep your car clean, without damaging the underlying protection.
What should I use if the car has a high mileage or has been exposed to bad weather for a long time?
Use our Foam Gun Prewash with the foam gun for the prewash, only after you have given it a bucket wash with the Neutral Foam Shampoo.
What should I do if I realise I have forgotten to rinse a part of the car when I am drying it? Or if it has been in the sun too long and the shampoo has dried? What should I do?
Use Exterior Quick Detailer to safely and easily remove any marks or rings. In fact, it can be used as a drying and finishing aid after washing.
What can I do if I want to add gloss and protection after drying as a final touch?
Use Exterior Quick Detailer.
What is the difference between doing a prewash with the Foam Gun Prewash and the Neutral Foam Shampoo?
Neutral Foam Shampoo is suitable for weekly or frequent washes. Once applied to your car, it needs to be left to work for longer and serves two purposes: it can be used as both a manual shampoo and as a prewash. Foam Gun Prewash, on the other hand, provides a deeper clean during the prewash and is perfect for dirty cars or vehicles that have high mileages.
Can I use a single bucket for the wash?
No, you must always use 2 buckets: one bucket with the water/shampoo solution and a second bucket with just the clean water. Every time you wipe the mitt over the panel of your car, first rinse it in the bucket with clean water and then dip it into the bucket with the water and shampoo solution. In doing so, you will prevent any residue that may still be on the surface from being picked up by the wash mitt and being moved from one panel to another and creating micro-scratches called swirls.
As each cap holds 10 ml of product, in a 12-litre water bucket, how many caps should I pour into the bucket to get a 1:400 dilution ratio?
3 bottle caps
If I make a mistake with the dilution and pour too much product, what can happen?
The product is neutral, so it won’t do any harm to the car body, even if you use too much. Used with a foam gun, the foam will be denser and heavier and will tend to fall off sooner, thus nullifying its emollient action on dirt. Used as a shampoo in the bucket, you will get no problems.
