// Welcome to our company

WHEEL AND TYRE CLEANER

WHEEL AND TYRE CLEANER

Removes brake dust and road dirt

  • Removes brake dust and road dirt
  • Effective for cleaning the tyres and the entyre wheel compartment
  • It is able to remove the polishes previously applied, thus preparing the tyres for the subsequent polishing or dressing phase
  • It has a specific and balanced acid-free, effective and safe formula

Wheel & Tire Cleaner is available in 1000ml format.

Buy Now
  • Versatile: for the most stubborn dirt it can be diluted 1: 5 (1 part of product and 5 parts of water) and for ordinary cleaning of the rim up to 1:20 (1 part of product and 20 parts of water) with use of a brush or a brush
  • Effortlessly dissolves winter road dirt and brake dust that settles on the rims, restoring its original appearance
  • Due to its high detergency capacity, it is also suitable for cleaning the suspension department, rubbers and coatings in wheel arch plastic
  • Effective for cleaning tyres even with white bands: it is able to remove previously applied tyre polishes and dirt accumulated throughout the wheel compartment
  • Sweet and pleasant scent

HOW TO USE:

  • Dilute 1: 5 (1 part of product and 5 parts of water)
  • Apply the solution directly on the surface to be treated;
  • Leave the product to act for a period between 1-2 minutes
  • Work the product with a brush to reach all the areas.
  • Rinse .

RECOMMENDATIONS:

  • Use the product only on completely cold surfaces, make sure that the surface to be treated is completely cooled due to its proximity to the braking system. Never let the product dry. To obtain a lubricated and easily workable foam, it is possible to dispense the product with the Nebula Foam manual pump.

Before washing the car, it is essential to remove the specific dirt present in the wheel compartment:
• ON THE RIMS we note in particular the accumulation of brake dust
• ON THE TYRES there is the stratification of previously applied polishes and road dirt
• IN THE ‘ENTIRE WHEEL COMPARTMENT is often present even coarse road dirt such as mud or typical winter dirt, particularly aggressive due to the presence of road salts.

This phase is very important not only because it allows us to speed up subsequent operations, but also because, by eliminating coarse dirt, we reduce the risk that by detaching, it can cause damage to the bodywork in the subsequent phases. washing.

• Make sure that the surface on which you dispense the product is never hot: this happens more easily, given the proximity to the braking system.
• Never let the product dry completely on the surface
• As we have seen, to obtain a lubricated and easily workable foam, the product can also be dispensed in foam mode with our Nebula Foam manual pump.

The product is very versatile, and lends itself to different dilutions:

MAKE SURE THE SURFACE IS COLD

Then accurately dispense the product, directly onto the rim and shoulder of the tyre

LET'S ALSO WIDEN THE WHEEL ARCH

We will have an effective cleaning action of the entire compartment.

LET IT ACT FOR 2 TO 5 MINUTES

Without ever allowing it to dry on the surface

WE CAN ALSO WORK IT

Facilitating, with the mechanical action, the detachment of the most stubborn dirt

FINALLY, WE PROCEED TO RINSE

In the presence of more stubborn dirt, we repeat the operation with the help of a brush or a brush to reach even the hidden areas.
The mechanical action, combined with its formula, it generates a lubricated foam that encapsulates dirt, facilitating its removal during the subsequent rinsing phase.
We can also dispense the product in foam mode, with our Nebula Foam manual pump.
The product is not touchless, but using the pressure of the pressure washer during rinsing, on not too stubborn dirt, it can also be used WITHOUT MECHANICAL ACTION.
At the end of the treatment the rim will be perfectly clean and, having also removed all traces of the previous tyre polish, we are ready to proceed with the manual washing in total safety.

HELPFUL TIPS TO WASH THE EXTERIOR

 
  •  ALWAYS IN THE SHADE

    Wash the car in a shaded area and never in direct sunlight, to prevent the shampoo from drying out, which will stain.

  •  NEVER ON HOT BODYWORK

    If the car has been exposed to the sun or the bonnet is very hot, cool the surface with a jet of cold water.

  •  START FROM THE TOP

    It is the least dirty part and you will avoid dirtying the glove: washing will be faster.

  •  TRY TO USE TWO BUCKET

    In the first you will put the solution of water and shampoo, in the second only water to rinse frequently the sponge or glove: you will avoid scratching the bodywork.

  •  WASH SMALL SECTIONS AT A TIME

    You will not forget any part, the product will be very effective and will not dry: you will prevent stains and marks.

  •  PERFECT RIMS

    Clean the rims with a brush that can reach the most hidden points.

Every time you wash the car to make cleaning the wheels safer and promote the adherence of the new tyre polish.

For stubborn dirt, you can use it pure or at a ratio of 1:1 to 1:3
For winter dirt, 1:5
For summer dirt, 1:10

Yes, you can apply the product directly onto the surface to be treated in foam mode also with our Nebula Foam hand pump.

Yes, it is safe of on all types of wheels, even the most delicate ones such as those that are painted black or coated with wraps or in Plasti Dip. It is safe on all types of tyres, as well as conventional tyres, with white bands or sport and off-road tyres with lettering and decals.

Once the product has been applied to the wheel, the brush helps to loosen the most stubborn dirt and reach the most hidden places.
If you do not have a high-pressure washer, the brush can help remove the most hidden dirt in the interstices of the wheel easily, especially with narrow spokes.